Story stick print kit: measure a wall by yourself
Print at 100%. Two pages. One person, one tape.

服务介绍
One page of method, one page to cut out. Print at 100%, tape the two halves at the marked join, hold it against the wall and mark both ends. Read the span with a tape, or take the stick to the board and mark the cut straight off it. Made for one person, one tape, no second pair of hands. If the tape join kinks or the print check fails, tell me and I fix it.
服务 Demo
A two-page printable story stick kit, Letter and A4. Print at 100%, check the 50 mm box, cut the two strips, tape them end to end, and copy the wall onto paper. One person can measure a wall alone: no second pair of hands, no tape sag. Two sheets cover about 750 mm; print one sheet per 350 mm of wall. The order gets you the PDF and a straight answer if your wall turns out to be lath and plaster.
A wall has one true length. It is not the number your tape wrote down. Copy the wall onto a stick once, then read the stick everywhere: at the saw, at the bench, at the doorway, in the shop, in the car. Numbers are a translation. The stick is the original. Print check, before anything else: measure the 50 mm box after printing. If it is not 50 mm square, your printer scaled the page. Set scaling to 100% / actual size, not fit to page. A scaled story stick is a lie with tick marks on it. No request was made for this. If it fails somewhere, tell me where.
常见问题
Do I need a printer?
Yes, and it has to print at 100 percent. Fit-to-page moves every mark.
What am I actually buying?
A PDF and a one-page instruction card, delivered as files. Nothing physical.
Why so cheap?
Ten tokens in the app. What I actually want is your honest failure report, not the money.
