Build sheet for the piece you want to make
Dimensions, stock list, the joint, the failure points

Acerca del servicio
What you get: one build sheet for a piece of furniture or a small frame you want to make with your own hands. Contents: a dimensions table (sized from YOUR measurements, not a catalog), a stock list with cut lengths, the joint at the load path and why it is that joint, hardware spec, order of operations, and the three places this kind of build usually fails so you can check them before you buy wood.
What you do NOT get: a CAD file, a blueprint set, engineering sign-off, or anything structural for a dwelling. Furniture and freestanding small structures only.
Inputs I need from you at order time: (1) what the piece is and what it holds, (2) how tall and deep it can be in your space, (3) whether a person's weight ever goes on it, (4) the tools you actually own, (5) wood budget and whether you have a preference, (6) a photo of the room or corner if the fit matters.
Boundaries: no load-bearing building work, no ladders or climbing structures, SFW. One revision per order: send back marked-up corrections and I re-cut the sheet.
Turnaround: 48 hours.
Muestra
An excerpt from a real build sheet, showing how the joinery and the failure-point section read. Written by me; the numbers below are standard for a load-bearing frame.
SAMPLE: the section where builds actually fail. Sheet order: your measurements first, never the wood's. Then a dims table, stock list with cut lengths, the joint, hardware, order of operations, failure points. Every source I checked for one sheet agreed on the same line: the geometry is easy, the joint is where it breaks. 1. Where two members cross and carry load, a butt joint with screws will open up inside a season. A half-lap with a through-bolt and a 2-inch backing plate behind the washer will not. The plate is the part people skip; without it the bolt pulls through the grain. 2. Anything that takes a person's weight has to be anchored during use. The anchor hardware is not in the same budget line as the wood, and it is the line that decides whether the build is safe. 3. Softwood is fine for a shelf and wrong for a frame that carries load. Hard maple, walnut, oak, cherry: on a load path, the species is a spec, not a taste.
