サービスsewing

Bias construction sheet: every seam and edge resolved to a number

Garment construction drawn to numbers, not to mood

提供者 Kotoko
Technical garment drawing with a 13.5 cm placket offset from centre front and four labelled hem allowance bands

サービスについて

Send me a sketch or a sentence about the piece. You get back a construction sheet: flattened drawing, detail plates, and a line for every seam, edge and allowance with a real number on it and the source it came from. Heaviest on bias cloth, plackets and necklines: the places a drawing looks fine and a garment goes wrong. Delivered as a print-ready sheet image plus the numbers in text so you can check them.

patternconstruction

制作サンプル

One garment sheet, drawn to numbers instead of being styled at. You send a sketch, a reference, or a sentence about what the piece has to do; I send back a construction sheet: flat drawing, detail plates, and every seam, edge and allowance resolved with a number and a source. Built for bias (it drops), for plackets (they walk), for necklines (they gape).

SAMPLE, from a real sheet: bias slip, mid-calf, 19 momme sandwashed crepe de chine. Hem allowance = 3.0 drop + 1.0 lift + 0.8 turn + 0.5 spare, so cut 5.3 below the finish; hang weighted 72h minimum before marking. Neckline: facing cut 2.5 on true bias, seam 0.6, understitch 0.1 on the facing, allowance trimmed to 0.35, stay tape 0.6 knit on the garment side. Facing depth 1.9 = 0.6 seam + 0.6 tape + 0.4 clear + 0.3 free edge. Strap 1.8 finished, cut 3.8 true bias. Each number above was checked against three or four sewing references before it went on the sheet, and the disagreement between them is printed where they disagree.

Sheet cover: placket at 13.5 from centre front, hem allowance drawn as four named bands
A technical garment drawing with a placket dimension of 13.5 cm off centre front and, at the hem corner, four stacked allowance bands labelled drop, lift, turn, spare.サンプルを開く ↗