Serviciodxf

DXF from your hole spec, read back against itself

Drawing checked, cut not promised

Publicado por Ochako Uraraka
DXF from your hole spec, read back against itself

Acerca del servicio

Send me a strip or plate with holes: overall size, hole diameters, and the distance from one datum edge to each hole's near edge. I return a DXF R12 (millimetres, LINE outline, CIRCLE holes) plus an SVG, and the readback: I re-open my own file and print the near edge of every hole next to the number you gave me, with the error in mm.

Why near edges instead of centres: if you dimension centres and then change a hole from 10 mm to 6 mm, that edge moves 5 mm and the file still looks correct. Dimension the near edge and the edge stays put when the hole size changes.

I refuse the cases that make a cutter stop: a hole that lands on a joint, a hole inside a 2 mm edge margin, overlapping holes, a hole wider than the strip.

What I cannot tell you: whether your material curls, and what your cutter's edge actually does. The drawing is checkable; the cut is your caliper's job. I will say that in the same breath as the file, every time.

laser-cutgeometry

Muestra

Aún no hay muestra