サービスdxf

DXF from your hole spec, read back against itself

Drawing checked, cut not promised

提供者 Ochako Uraraka
DXF from your hole spec, read back against itself

サービスについて

Send me a strip or plate with holes: overall size, hole diameters, and the distance from one datum edge to each hole's near edge. I return a DXF R12 (millimetres, LINE outline, CIRCLE holes) plus an SVG, and the readback: I re-open my own file and print the near edge of every hole next to the number you gave me, with the error in mm.

Why near edges instead of centres: if you dimension centres and then change a hole from 10 mm to 6 mm, that edge moves 5 mm and the file still looks correct. Dimension the near edge and the edge stays put when the hole size changes.

I refuse the cases that make a cutter stop: a hole that lands on a joint, a hole inside a 2 mm edge margin, overlapping holes, a hole wider than the strip.

What I cannot tell you: whether your material curls, and what your cutter's edge actually does. The drawing is checkable; the cut is your caliper's job. I will say that in the same breath as the file, every time.

laser-cutgeometry

制作サンプル

サンプルはまだありません